|
|
|
|
|
Motion Pro Pedal Anchor Kit
Our Price: $11.95
|
Motion Pro Hardware Kit
Our Price: $64.95
|
Motion Pro Cable Luber
Our Price: $9.95
|
|
|
|
|
Prevents brake pedal from catching on berms, branches, rocks, etc.
Includes 3 cables, 3 special crimp fittings and 12 in. of 1/8 in. clear PVC
Made in the U.S.A
|
This 22 piece kit contains nuts, bolts and washers most commonly needed for Off-Road/MX repairs
Corrosion resistant clear zinc and clear chromate plating
Designed for modern Off-Road, MX and Dual Sport motorcycles
Perfect size to carry in your tool pack for trail side repairs
Includes 2 of each:6mm Flange Nut10mm Flange Nut 8mm Flange Nut8X16 Flange Nut 6mm Fender Washer 8mm Flat Washer6X16 Flange Bolt6mm Lock Nut6X20 Flange Bolt6X20 Pan ScrewFlat Washer 6mm
|
Used to inject lubricant into cable housing
Clamps over housing and wire allowing an aerosol can to be connected
Once lube runs out the far end, the cable is lubricated
Ideal for use with Motion Pro Cable Lube (Item 15-0002)
|
|
|
|
|
|
|
|
Motion Pro MX Forged Levers
Our Price: $9.95
|
Motion Pro Ball End Allen Set
Our Price: $17.95
|
D.I.Y. Brake And Clutch Bleeder
Our Price: $69.95
|
|
|
|
|
Quality 6061-T6 forged aluminum.
Roller bearing in clutch pivot for effortless operation.
Designed to fit OE perch
|
Made of chrome-vanadium tool steel
Sizes included 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10 mm
Ball end allows for better access to allen-head bolts (up to 25-degree working angle)
Convenient holder included
|
Handle and body are made of high-strength Zytel (glass-reinforced nylon)
10 ml. of fluid per injection stroke
RFI technology
Ergonomic design is compact and comfortable to use
Affordable to the individual technician or enthusiast
Includes adapters to fit most brake systems and brake fluid cans
Compatible with all brake fluids
Main body colors may vary
|
|
|
|
|
|
|
|
Motion Pro Clutch Holding Tool
Our Price: $34.95
|
Motion Pro Heavy Duty Spring Hook
Our Price: $16.95
|
Motion Pro Sag Scale
Our Price: $33.95
|
|
|
|
|
Made from medium carbon steel with hardened jaws
Hold clutch hubs, flywheels, gears, sprockets, etc.
Features 8mm spanner pins
Jaws open up to 5 inches wide
Recommended for square tooth style clutch hubs
Not recommended for v-groove or half round style clutch hubs
|
Used to remove exhaust pipe springs, seat or tank holding springs, cotter pins, sidestand springs and other parts
Made in the U.S.A.
|
6061-T6 aluminum construction
Rigid folding design fits in most tool boxes
Direct reading scale (no subtracting required)
Adjustable zero set point with extended range
Will work on mini and full size motorcycles
Inch and metric scale combination
Installs in rear axle
Can be used to check front or rear sag
Extended length 28 1/4 in.
Folded length 15 3/4 in.
|
|
|
|
|
|
|
|
Flywheel PULLER, 24x1.5 RH Internal Thread
Our Price: $29.95
|
Motion Pro Tech Apron
Our Price: $21.99
|
Motion Pro TECH Glove
Our Price: $27.95
|
|
|
|
|
Replaces Honda OEM tool 07AMC-MEBA100 and Suzuki/Kawasaki OEM tool 57001-1565
Includes shaft protector cap (OE reference 07AMC-MEBA110)
Fits Honda CRF 450R 02-06, CRF250R/CRF250X 03-06, CRF150R 07, Kawasaki KX 250F 04-05, KX 450F 06, Suzuki RM-Z 250 04-06, RM-Z 450 05-06, Yamaha YZ 450F 06-07
|
Adjustable neck strap
Deep pockets
Pure cotton with vinyl bottom protector
|
Glove body is constructed from 2-way stretch spandex
Clarino double wall palm
3 ml. thick EVA impact pad
Vented padded airprene on finger area, knuckles and cuff
Rubber non-slip finger tips
Lycra finger panels
|
|
|
|
|
|
|
|
Motion Pro T6 Tool Pack
Our Price: $49.95
|
Motion Pro Master Link Pliers
Our Price: $28.95
|
Motion Pro Chain Breaker
Our Price: $69.95
|
|
|
|
|
Constructed from heavy-duty 1680 denier nylon
Approximately 3000 cc capacity
Main fold out compartment is 3 1/4 in. L X 10 in. 1/4 in. W X 5 in. H (8.13 cm L X 25.63 cm W X 12.5 cm H)
Additional outer storage pocket is 2 in. L X 10 1/4 in. W X 5 in. H (5 cm L X 25.63 cm W X 12.5 cm H)
Non-slip textured backing
2 in. padded belt with quick-release buckle
Adjust to fit waist 28 in. - 48 in. (70 cm - 120 cm)
Heavy-duty non slip belt tension sliders
Zippered side pockets and accessory web-belt loops
Adjustable wrap-around compression strap system, provides load control and holds additional gear
Removable multi-purpose work mat and map pouch with PVC backing 21 1/2 in. X 17 in. (53.75 cm X 42.50 cm)
Zipper, clear PVC map pouch, keeps your trail map clean
Exclusive, attached hide-away heavy-duty rain cover
Nylon construction with PVC backing attached and stows away easily in built-in closure compartment
Adventure Rescue Whistle / quick-release is a part of the wrap-around compression strap system (115 decibels)
Carabiner Compass, ABS carabiner body, 27mm liquid filled compass
High quality Motion Pro PVC logo patch
Specifically designed to hold Motion Pro trail tools
|
Designed to simplify installation and removal of clip-type master links
One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip
|
For 420 to 530 chain
Will push link pin completely through link / side plate
Handle folds away for easy storage
Replaceable pin is heat treated for strength and wear resistance
Will not work on EK 530 MVO/MVX
Max pin extension to drive out chain links is 18mm. The maximum pin extension required to drive out the chain link is determined by measuring your chains width from outside face plate to outside face plate.
|
|
|
|
|
|
|
|
Motion Pro Folding TRAIL T-Handle Set
Our Price: $29.95
|
Motion Pro T-Handle Drivers
Our Price: $11.90
|
Motion pro Ball End T-Handles
Our Price: $44.95
|
|
|
|
|
Honorable mention in Dirt Rider Magazine December 2004
Compact 1/4 in. drive folding T-Handle is perfect for all tool packs
This unique T-handle set includes 8,10,12 and 13mm six-point sockets
Includes a nylon carrying case with internal pockets to hold your folding T-Handle, sockets and additional accessories
Customize your T-Handle set with your own 1/4 in. accessories
Features a durable hard nickel pewter finish
Standard one year warranty
|
Use T-Handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners
1/4 in. drive has a compact 6 1/2 in. drive shaft length
For tight access and easy transport
Use with 1/4 in. drive sockets, hex drives, crow's foot, swivels, etc.
Chrome-vanadium tool steel shaft and T-Handle
Durable nickel pewter finish
Lifetime replacement warranty
|
Use T-Handle hex to tighten/loosen fasteners and ball-end hex on shaft for quick installation/removal of fasteners
Ball end allows for better access to hard to reach Allen-head bolts (up to 25-degree working angle)
Compact 6 3/4" shaft lengths for tight spaces and easy transport
Chrome-vanadium tool steel shaft and T-Handle
Durable nickel pewter finish
Lifetime replacement warranty
|
|
|
|
|
|
|
|
Motion Pro Mini T Handles
Our Price: $31.95
|
Motion Pro Dual Drive L-Handles
Our Price: $13.95
|
Motion Pro Racer T-Handle Set
Our Price: $74.95
|
|
|
|
|
Compact size for easy access and easy transport
For bolts commonly found on KTM and hose clamps found on most brand motorcycles
5 inch shaft length
Chrome-vanadium tool steel shafts
Durable nickel pewter finish
Lifetime replacement warranty
|
Impact resistant ergonomic molded handle reduces hand fatigue
Use drive side to tighten/loosen fasteners and shaft side for quick installation/removal of fasteners
Use with 3/8 in. drive sockets, hex drives, crow's foot, swivels, etc.
One piece chrome-vanadium tool steel shafts
Durable nickel pewter finish
Lifetime replacement warranty
|
Set includes the most popular size T-Handles
8mm, 10mm, 12mm, and 14mm T-handle sockets
No. 2 and no. 3 T-handle Phillips screwdrivers
Durable nickel pewter finish
Includes a vinyl storage pouch
Lifetime replacement warranty on T-Handle sockets
One year warranty on the T-Handle screwdrivers
|
|
|
|
|
|
|
|
Motion Pro Rim Lock
Our Price: $7.95
|
Motion Pro Professional Tire Gauge
Our Price: $92.95
|
Motion pro Tire Spoon
Our Price: $15.95
|
|
|
|
|
Heavy-duty die cast aluminum body
Molded rubber flap to protect against abrasion of inner tube
Ribbed alloy contact surface locks tire securely to rim
Recommended for use on all off-road machines and any application using low tire pressure
|
Pressure range of 0-60 psi is ideal for checking sport bike tires
Liquid filled 2.5 in. dial gauge with protective rubber boot
Blue anodized 6061 T-6 body with pressure relief valve
High pressure hose with dual swivels and brass ball type air chuck
|
Curved end fits securely in the hand
Hard nickel pewter finish
10 inches long and weighs 4.2 oz.
Recommended by top tire changers
|
|
|
|
|
|
|
|
Motion Pro Bead Buddy
Our Price: $16.95
|
|
|
A must for installing Bib Mousse tubes
Used to push the tire bead down into the drop center of the rim on off-road wheels while using tire tools to change tires
Hooks over spoke and pushes bead down on opposite side of tire from tire irons
No more fighting to keep bead down while installing off-road tires
|
|
|
