|
Gift Certificate
|
|
Motion pro Tire Spoon
|
|
Motion Pro Rim Lock
|
|
Our Price:
|
|
|
|
Our Price: $15.95
|
|
|
|
Our Price: $7.95
|
|
|
|
|
|
|
Active 8 Racing Gift Certificate
|
Curved end fits securely in the hand
Hard nickel pewter finish
10 inches long and weighs 4.2 oz.
Recommended by top tire changers
|
Heavy-duty die cast aluminum body
Molded rubber flap to protect against abrasion of inner tube
Ribbed alloy contact surface locks tire securely to rim
Recommended for use on all off-road machines and any application using low tire pressure
|
|
|
|
Motion Pro T-Handle Drivers
|
|
Motion Pro Tech Apron
|
|
Kal Gard Chain Kote
|
|
Our Price: $11.90
|
|
|
|
Our Price: $21.99
|
|
|
List Price: $9.95
Our Price: $8.95
You Save $1.00
|
|
|
|
|
|
Use T-Handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners
1/4 in. drive has a compact 6 1/2 in. drive shaft length
For tight access and easy transport
Use with 1/4 in. drive sockets, hex drives, crow's foot, swivels, etc.
Chrome-vanadium tool steel shaft and T-Handle
Durable nickel pewter finish
Lifetime replacement warranty
|
Adjustable neck strap
Deep pockets
Pure cotton with vinyl bottom protector
|
CHAIN KOTE is a specially developed lubricant for heavy duty roller chain applications. Chains have a unique requirement in that the lubricant must be very thin to penetrate the critical inner roller area, but thick enough to resist being thrown off at high speeds. CHAIN KOTE is the perfect answer. It has a thin, penetrating lubricant that carries a high concentration of Moly and a high viscosity bonding agent which bonds directly to the areas of maximum load and wear. CHAIN KOTE will not be thrown off your chain at high speeds when properly applied.
13 oz.
|
|
|
|
Kal Gard Contact Cleaner
|
|
Kal Gard Clear Chain Kote
|
|
Kal Gard Fabric Filter Oil
|
List Price: $6.95
Our Price: $6.50
You Save $0.45
|
|
|
List Price: $11.50
Our Price: $10.50
You Save $1.00
|
|
|
List Price: $7.25
Our Price: $6.50
You Save $0.75
|
|
|
|
|
|
Easy to use CONTACT CLEANER is used to remove brake fluid, grease, and dirt from internal components of electronic equipment and devices, including radios, compact discs, electronic ignitions and computers. CONTACT CLEANER extends the life of electronic components. It quickly flushes away grease, oil, dirt and dust. There is no need to disassemble small, delicate electronics.
13 oz.
|
Just like the original CHAIN KOTE, but in a clear formula. An excellent lubricant designed especially for roller chains. The light penetrating lubricant thickens right after application, and will not be thrown off even at racing speeds. It also lubes and protects O-Rings. It will not wash off in rain, but can easily be removed with CONTACT CLEANER.
13 oz.
|
FABRIC FILTER OIL is a special blend of synthetic oil that stops sand, dirt and other contaminants from passing through the filter.This product will be especially popular with off-road and road racing motorcycle riders. FABRIC FILTER OIL is easy to apply and penetrates quickly into the smallest crevices to trap the maximum amount of dirt, contributing greatly to increased engine life.
Part# 01515 15 oz.
|
|
|
|
Kal Gard Filter Cleaner
|
|
Kal Gard 30/30
|
|
Kal Gard Degreaser
|
List Price: $8.95
Our Price: $8.50
You Save $0.45
|
|
|
List Price: $7.50
Our Price: $6.75
You Save $0.75
|
|
|
List Price: $7.95
Our Price: $7.50
You Save $0.45
|
|
|
|
|
|
FILTER CLEANER is the answer to a motorcyclist’s prayer. All you need to do is spray this product on your greasy, dirt-clogged filter, rinse with clean water, and that’s it! FILTER CLEANER works fast, and is extremely effective. Even the thickest grunge just melts away instantly, leaving your filter clean and ready to use. There is no need to use gasoline or other flammable liquids ever again. FILTER CLEANER is completely water-soluble and biodegradable. It can be used on all foam and fabric filters.
15 oz.
|
30/30
A penetrant and light lubricant that works fast, is harmless to most plastics, paints, rubber and metals. 30-30 is perfect for preventing corrosion when salt water or high humidity is a problem. It will end squeaks while loosening rust and providing protection for metal parts. 13 oz.
|
Ideal anywhere when fast removal of grease and oil is necessary. DE-GREASER penetrates rapidly, and rinses clean with plain water. Contains no harmful chemicals that will damage surfaces to be cleaned. DE-GREASER is great for motorcycles, ATVs, Side by Sides, karts, garage floors, bicycles, and almost anything else. It is water-soluble and biodegradable.
13 oz.
|
|
|
|
Rebound Tech Duel CMPD Grip
|
|
Slim Grip Med. Half Waffle
|
|
Kal Gard 10W-40 Full Synthetic
|
List Price: $15.99
Our Price: $13.99
You Save $2.00
|
|
|
List Price: $9.99
Our Price: $9.00
You Save $0.99
|
|
|
List Price: $13.50
Our Price: $12.50
You Save $1.00
|
|
|
|
|
|
Starting with the same concept that is used with motorcycle suspension, Tag Metals has developed the most comfortable grip in the world.
This breakthrough will allow you to ride longer (up to 40% longer) before fatigue or blisters can affect you. When you are racing,every single bump, rut, or jump sends a shock through your hands and into your arms. This undesirable shock is transferred directly to you entire musculoskeletal system which can produce pain, fatigue, arm pump and increased wear and tear on your wrists. When you are working so hard to win, doesn’t it make sense to do all that you can to reduce these unwanted effects?
|
* Thicker diameter for more vibration damping
* Half-waffle pattern
* Available in grey
* Unmatched value
* The best grip in the world at this price point
|
KAL-GARD’s 10W-40 is a high performance synthetic oil designed to meet the latest motorcycle manufacturers’ warranty requirements. Specifically formulated to meet the demands of the small displacement, high RPM, fuel efficient engines found in today's domestic and foreign bikes. These engines experience higher operating temperatures and require an oil which offers maximum protection against both viscosity and thermal breakdown.
Part# 00037 | 1 qt.
|
|
|
|
Kal Gard 10W-50 Full Synthetic
|
|
Kal Gard 2 Cycle Smokless Full Synthetic
|
|
Kal Gard 10W-40 Synthetic Blend
|
List Price: $13.50
Our Price: $12.50
You Save $1.00
|
|
|
List Price: $15.25
Our Price: $14.25
You Save $1.00
|
|
|
List Price: $12.75
Our Price: $11.75
You Save $1.00
|
|
|
|
|
|
KAL-GARD’s 10W-50 is a high performance synthetic oil designed to meet the latest motorcycle manufacturers’ warranty requirements. Specifically formulated to meet the demands of the small displacement, high RPM, fuel efficient engines found in today's domestic and foreign bikes. These engines experience higher operating temperatures and require an oil which offers maximum protection against both viscosity and thermal breakdown.
Part# 000150 | 1 qt.
Part# 00051 | 1 qt.
|
Pro-Comp 2 Premium 2T 100% Synthetic Racing Oil is manufactured from premium base oils using special additives designed to minimize carbon. Fortified with low ash which provides high temperature protection to air-cooled engines. Low ash formulation is designed to minimize spark plug fouling and combustion chamber deposits. Specifically formulated to meet the demands of the small displacement, high RPM, fuel efficient engines found in today's domestic and foreign bikes. Meets API, TC, JASO FC and ISO EGD specifications.
Part# 00916 | 1 qt.
|
KAL-GARD’s 10W-40 is a high performance synthetic blend oil designed to meet the latest motorcycle manufacturers’ warranty requirements. Specifically formulated to meet the demands of the small displacement, high RPM, fuel efficient engines found in today's domestic and foreign bikes. These engines experience higher operating temperatures and require an oil which offers maximum protection against both viscosity and thermal breakdown.
Part# 00051 | 1 qt.
|
|
|
|
Kal Gard 10W-50 Synthetic Blend
|
|
Kal Gard 20W-50 Synthetic Blend
|
|
Kal Gard Engine Gard
|
List Price: $12.75
Our Price: $11.75
You Save $1.00
|
|
|
List Price: $12.75
Our Price: $11.75
You Save $1.00
|
|
|
List Price: $8.95
Our Price: $7.95
You Save $1.00
|
|
|
|
|
|
KAL-GARD’s 10W-50 is a high performance synthetic blend oil designed to meet the latest motorcycle manufacturers’ warranty requirements. Specifically formulated to meet the demands of the small displacement, high RPM, fuel efficient engines found in today's domestic and foreign bikes. These engines experience higher operating temperatures and require an oil which offers maximum protection against both viscosity and thermal breakdown.
Part# 00075 | 1 qt.
|
KAL-GARD’s 20W-50 is a high performance synthetic blend oil designed to meet the latest motorcycle manufacturers’ warranty requirements. Specifically formulated to meet the demands of the small displacement, high RPM, fuel efficient engines found in today's domestic and foreign bikes. These engines experience higher operating temperatures and require an oil which offers maximum protection against both viscosity and thermal breakdown.
Part# 00068 | 1 qt.
|
Engine Gard contains molybdenum disulfide, a high technology lubricant that greatly reduces friction and wear. ENGINE GARD will withstand pressures in excess of 350,000 lbs/sq in. without breaking down. It is especially suited for high performance and racing use where the ultimate in lubrication is required.
Part# 00108 | 8 oz.
|
|
|
|
Kal Gard Foam Filter Oil 1 qt
|
|
Kal Gard Foam Filter Oil 15 oz
|
|
|
List Price: $14.95
Our Price: $14.00
You Save $0.95
|
|
|
List Price: $9.25
Our Price: $8.50
You Save $0.75
|
|
|
|
|
Foam Filter Oil - 1 qt.
One of the most popular products that Kal Gard Lubricants offers is our aerosol Foam Filter Oil. However, when our customers speak, we listen. By popular demand Kal Gard now offers the same great product in a one quart container. Simply pour Kal Gard Foam Filter Oil onto your filter, work it in and you are ready for a trouble free ride regardless of the dirt or dust conditions. When cleaning the filter always use Kal Gard Filter Cleaner for best results
Part# 00167 | 1 qt.
|
Foam Filter Oil - 15 oz.
FOAM FILTER OIL is a special blend of synthetic oil that stops sand, dirt and other contaminants from passing through the filter. This product will be especially popular with off-road and road racing motorcycle riders. FOAM FILTER OIL is easy to apply and penetrates quickly into the smallest crevices to trap the maximum amount of dirt, contributing greatly to increased engine life.
Part# 01315 | 15 oz.
|
|
|
